Jyoti Power Tools & Hardware

Tenax Ager is from the Roff stone care range. It is a colour-enhancing sealer that is used to achieve a wet look on stone, granite, and marble. The Tenax Ager sealer enters the microporosities of the material in order to give a permanent wet look and anti-graffiti effect.

• Tenax Ager is a color-enhancing sealer liquid that is suitable for application on all types of granite, marble, and stones.
• It is suitable for use on outdoor as well as indoor surfaces.
• It protects the surface from oil and water.
• Can be used to avoid coffee, Ketchup and wine stains on light coloredstones
• It gives wet look and an anti-scratch effect.

• Material: It can be can used in marbles, travertines, stones, granites and agglomerates. It is recommended to use this stone colour-enhancing sealer on rough, sanded, or honed surfaces to get a wet look. It gives an aesthetic look and protects the material from oil and water.
• Surface: It is suitable for indoor as well as outdoor surfaces.
• Application: The product must be evenly applied on dry and clean materials. The presence of water, and dust can influence the result regarding the uniformity of the surface.

Things To Consider

• Tenax Ager should be properly and evenly applied on a dry and clean material to achieve a wet look.
• Any external material such as dirt, water, or dust may result in an unfinished final look. It may also lead to a lack of uniformity on the surface.
• A brush, sponge, cloth, or gun spray should be used for the easy spreadability of the product.
• It is important to use adequate quantity to achieve a wet look. Excessive use of the product can create a superficial film that does not look good.
• Using the right quantity of material also ensures that the material can naturally absorb the product.
• This treatment can be repeated to get the desired look, 10-15 minutes after the first application.
• Let the surface dry for 24 hours to get the anti-stain effect.
• If the product is applied on the floor, make sure that no one steps on the surface until the product is completely dry.
• It is advised to do a patch test before applying the product to the material for the first time. Close the tin containing the product properly after use.

• Tenax Ager should be properly and evenly applied on a dry and clean material to achieve a wet look.
• Any external material such as dirt, water, or dust may result in an unfinished final look. It may also lead to a lack of uniformity on the surface.
• A brush, sponge, cloth, or gun spray should be used for the easy spreadability of the product.
• It is important to use adequate quantity to achieve a wet look. Excessive use of the product can create a superficial film that does not look good.
• Using the right quantity of material also ensures that the material can naturally absorb the product.
• This treatment can be repeated to get the desired look, 10-15 minutes after the first application.
• Let the surface dry for 24 hours to get the anti-stain effect.
• If the product is applied on the floor, make sure that no one steps on the surface until the product is completely dry.
• It is advised to do a patch test before applying the product to the material for the first time. Close the tin containing the product properly after use.

We are engaged in offering Tenax Crystal Polish to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering Crew High Gloss Marble Polish to our clients. Our range of all products is widely appreciated by our clients.